Increased performance where applicable for stronger acceleration and improved working capability.
STEINBAUER application
Ford Tourneo Power Module
2.0 TDE
Increase from 84 BHP to 99 BHP and from 200 Nm to 250 Nm — without ECU remapping.
STEINBAUER performance module for the Ford Tourneo 2.0 TDE, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Up to +25% power and torque increase, depending on application.
- No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
- Injection duration module developed to add performance without generic one-size-fits-all mapping.
- Removable solution that can be removed if required.
- Application-specific development for the individual engine and vehicle or machine application.
- Efficiency — Additional torque can help maintain progress at lower engine speeds when travelling loaded or climbing gradients, which may support improved fuel efficiency.
Actual fuel consumption depends on vehicle load, operating conditions, terrain and driving or operating style.
Vehicle details
Not sure this is right for your
Tourneo?
Ask STEINBAUER UK →
Learn more about pick-up & van tuning →
- Manufacturer
- Ford
- Model
- Tourneo
- Engine
- 2.0 TDE
- Displacement
- 1,998 cc
STEINBAUER
Performance comparison
Power (BHP)
Illustrative car engine-speed curve
Move across the graph to explore RPM
Standard
84 BHP
STEINBAUER
99 BHP
+15 BHP
Torque (Nm)
Illustrative car engine-speed curve
Move across the graph to explore RPM
Standard
200 Nm
STEINBAUER
250 Nm
+50 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Motorhome performance
More about van & motorhome tuning →
More usable torque when travelling loaded
Motorhome applications focus on loaded running, gradients and relaxed real-world drivability.
Loaded running
Additional torque for fully equipped touring use.
Gradients
Stronger pulling performance on hills and long climbs.
Cruising
Improved response through normal road speeds.
Removable
Hardware can be removed to return the vehicle to standard.
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
Installation guides
Installation instructions for STEINBAUER part number 200020 .
Login required.
Installation guides are available to registered STEINBAUER customers,
dealers and administrators.
Ford Tourneo tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Ford Tourneo power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 84 BHP to 99 BHP, with torque increasing from 200 Nm to 250 Nm.
If you are searching for a Ford Tourneo tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.