Increased performance where applicable for stronger acceleration and improved working capability.
STEINBAUER application
Krone BiG X 800 Power Module
12.8L OM460LA + 7.2L OM926LA
Increase from 789 BHP to 986 BHP and from 3,450 Nm to 4,313 Nm — without ECU remapping.
STEINBAUER performance module for the Krone BiG X 800 12.8L OM460LA + 7.2L OM926LA, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Up to +25% power and torque increase, depending on application.
- No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
- Injection duration module developed to add performance without generic one-size-fits-all mapping.
- Removable solution that can be removed if required.
- Application-specific development for the individual engine and vehicle or machine application.
- Efficiency — Additional torque can help maintain performance under load without relying on excessive engine speed, which may support more efficient fuel use during field work, PTO operation and transport.
Actual fuel consumption depends on vehicle load, operating conditions, terrain and driving or operating style.
Vehicle details
Not sure this is right for your
BiG X 800?
Ask STEINBAUER UK →
Learn more about tractor tuning →
- Manufacturer
- Krone
- Model
- BiG X 800
- Engine
- 12.8L OM460LA + 7.2L OM926LA
- Displacement
- 20,000 cc
STEINBAUER
Performance comparison
Power (BHP)
Illustrative agricultural engine-speed curve
Move across the graph to explore RPM
Standard
789 BHP
STEINBAUER
986 BHP
+197 BHP
Torque (Nm)
Illustrative agricultural engine-speed curve
Move across the graph to explore RPM
Standard
3,450 Nm
STEINBAUER
4,313 Nm
+863 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Agricultural performance
More about STEINBAUER tractor tuning →
Developed for real agricultural work
The additional output is aimed at the working range used for field work, PTO operation and transport rather than simply chasing a peak power figure.
Pulling performance
More usable torque for cultivation, gradients and heavy field work.
PTO performance
Additional output for PTO-driven implements and demanding operations.
Transport
Stronger response when towing, carrying loads or working on gradients.
PTO dyno testing
STEINBAUER UK can test suitable tractors before and after installation.
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
Power and torque upgrade
Krone BiG X 800 tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Krone BiG X 800 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 789 BHP to 986 BHP, with torque increasing from 3,450 Nm to 4,313 Nm.
If you are searching for a Krone BiG X 800 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.