Increased performance where applicable for stronger acceleration and improved working capability.
STEINBAUER application
Prinoth Raptor 800 Power Module
18.1L CAT C18 Tier 3
Increase from 630 BHP to 787 BHP and from 2,951 Nm to 3,688 Nm — without ECU remapping.
STEINBAUER performance module for the Prinoth Raptor 800 18.1L CAT C18 Tier 3, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Up to +25% power and torque increase, depending on application.
- No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
- Injection duration module developed to add performance without generic one-size-fits-all mapping.
- Removable solution that can be removed if required.
- Application-specific development for the individual engine and vehicle or machine application.
- Efficiency — More usable torque through demanding work cycles can reduce the need for excessive engine speed under load, which may support more efficient fuel use.
Actual fuel consumption depends on vehicle load, operating conditions, terrain and driving or operating style.
Vehicle details
Not sure this is right for your
Raptor 800?
Ask STEINBAUER UK →
Learn more about construction tuning →
- Manufacturer
- Prinoth
- Model
- Raptor 800
- Engine
- 18.1L CAT C18 Tier 3
- Displacement
- 18,100 cc
STEINBAUER
Performance comparison
Power (BHP)
Illustrative agricultural engine-speed curve
Move across the graph to explore RPM
Standard
630 BHP
STEINBAUER
787 BHP
+157 BHP
Torque (Nm)
Illustrative agricultural engine-speed curve
Move across the graph to explore RPM
Standard
2,951 Nm
STEINBAUER
3,688 Nm
+737 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Construction performance
More about construction applications →
Usable output for hard-working plant
Construction applications are developed around repeated digging, loading, lifting and hydraulic work cycles.
Digging
More engine response when working under repeated excavation load.
Loading
Stronger usable torque for loaders and material handling.
Hydraulic work
Improved engine response through demanding hydraulic cycles.
Working range
Performance concentrated where construction machinery operates.
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
Prinoth Raptor 800 tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Prinoth Raptor 800 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 630 BHP to 787 BHP, with torque increasing from 2,951 Nm to 3,688 Nm.
If you are searching for a Prinoth Raptor 800 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.