Increased performance where applicable for stronger acceleration and improved working capability.
STEINBAUER application
Rigitrac SKH 90 Power Module
3.3L AGCO Power 33CTA
Increase from 91 BHP to 114 BHP and from 540 Nm to 675 Nm — without ECU remapping.
STEINBAUER performance module for the Rigitrac SKH 90 3.3L AGCO Power 33CTA, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Up to +25% power and torque increase, depending on application.
- No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
- Injection duration module developed to add performance without generic one-size-fits-all mapping.
- Removable solution that can be removed if required.
- Application-specific development for the individual engine and vehicle or machine application.
- Efficiency — Additional torque can help maintain performance under load without relying on excessive engine speed, which may support more efficient fuel use during field work, PTO operation and transport.
Actual fuel consumption depends on vehicle load, operating conditions, terrain and driving or operating style.
Vehicle details
Not sure this is right for your
SKH 90?
Ask STEINBAUER UK →
Learn more about tractor tuning →
- Manufacturer
- Rigitrac
- Model
- SKH 90
- Engine
- 3.3L AGCO Power 33CTA
- Displacement
- 3,300 cc
STEINBAUER
Performance comparison
Power (BHP)
Illustrative agricultural engine-speed curve
Move across the graph to explore RPM
Standard
91 BHP
STEINBAUER
114 BHP
+23 BHP
Torque (Nm)
Illustrative agricultural engine-speed curve
Move across the graph to explore RPM
Standard
540 Nm
STEINBAUER
675 Nm
+135 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Agricultural performance
More about STEINBAUER tractor tuning →
Developed for real agricultural work
The additional output is aimed at the working range used for field work, PTO operation and transport rather than simply chasing a peak power figure.
Pulling performance
More usable torque for cultivation, gradients and heavy field work.
PTO performance
Additional output for PTO-driven implements and demanding operations.
Transport
Stronger response when towing, carrying loads or working on gradients.
PTO dyno testing
STEINBAUER UK can test suitable tractors before and after installation.
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
Power and torque upgrade
Rigitrac SKH 90 tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Rigitrac SKH 90 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 91 BHP to 114 BHP, with torque increasing from 540 Nm to 675 Nm.
If you are searching for a Rigitrac SKH 90 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.