FPT engine tuning

FPT Cursor 9 tuning & performance modules.

Browse STEINBAUER applications for FPT Cursor 9 engines. Find the correct application by machine or vehicle, engine specification, factory power output and STEINBAUER part number.

View compatible applications Open the full finder
Engine family

One engine family. Many different applications.

FPT Cursor 9 engines are used in high-output agricultural, harvesting, commercial and specialist machinery. STEINBAUER therefore matches the module to the exact machine or vehicle and engine application rather than treating every engine in the family as identical.

103 matching published applications
16 STEINBAUER part numbers represented
Up to 25% additional performance where applicable
Compatible applications

Find your FPT Cursor 9 application.

Select the exact model and engine specification below. Each result links to its dedicated STEINBAUER application page with power, torque, part number and ordering details.

Case IH Axial-Flow 6150 (Model Year: 2016-2025) 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 396 → 493 BHP
Torque — → — Nm
Part number 240075
→
Case IH Axial-Flow 6160 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 347 → 433 BHP
Torque — → — Nm
Part number 240075
→
Case IH Axial-Flow 7010 8.7L Iveco Cursor 9 Tier 3
Power 350 → 437 BHP
Torque — → — Nm
Part number 220428
→
Case IH Axial-Flow 7010 8.7L Iveco Cursor 9 Tier 3
Power 350 → 437 BHP
Torque — → — Nm
Part number 230130
→
Case IH Axial-Flow 7120 8.7L Iveco Cursor 9 Tier 3
Power 359 → 430 BHP
Torque — → — Nm
Part number 220428
→
Case IH Axial-Flow 7120 8.7L Iveco Cursor 9 Tier 3
Power 359 → 430 BHP
Torque — → — Nm
Part number 230130
→
Case IH Axial-Flow 7150 (Model Year: 2016-2025) 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 447 → 558 BHP
Torque — → — Nm
Part number 240075
→
Case IH Axial-Flow 7160 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 375 → 469 BHP
Torque — → — Nm
Part number 240075
→
Case IH Cotton Express 635 8.7L Iveco Cursor 9 Tier 3
Power 394 → 506 BHP
Torque — → — Nm
Part number 220695
→
Case IH Cotton Express 635 8.7L Iveco Cursor 9 Tier 3
Power 394 → 506 BHP
Torque — → — Nm
Part number 230140
→
Case IH Magnum 265 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 266 → 318 BHP
Torque — → — Nm
Part number 240075
→
Case IH Magnum 295 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 295 → 354 BHP
Torque — → — Nm
Part number 240075
→
Case IH Magnum 325 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 325 → 390 BHP
Torque — → — Nm
Part number 240075
→
Case IH Magnum 355 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 355 → 426 BHP
Torque — → — Nm
Part number 240075
→
Case IH Magnum 355 Rowtrac 8.7L FPT Cursor 9 (8 connector ECU) Stage V
Power 355 → 426 BHP
Torque — → — Nm
Part number 240075
→
Case IH Magnum 370 CVX 8.7L FPT Cursor 9 Tier 4A
Power 362 → 453 BHP
Torque 1,806 → 2,258 Nm
Part number 220464
→
View all FPT Cursor 9 applications
STEINBAUER technology

Additional usable power without permanently rewriting the ECU.

STEINBAUER works alongside the original engine management system. The module uses application-specific injection-duration optimisation while leaving the original ECU software in place.

  • No permanent ECU remap
  • No common-rail pressure increase
  • No change to injection timing
  • Factory ECU safety strategies remain active
  • Removable hardware solution
  • UK installation and technical support
How STEINBAUER works
Questions about FPT Cursor 9 tuning

Frequently asked questions.

Can a FPT Cursor 9 engine be tuned with STEINBAUER?

Yes, where a matching STEINBAUER application has been developed for the exact machine, engine management system and factory power level. Use the application list on this page to identify a compatible application.

Is every FPT Cursor 9 engine the same?

No. Engines within the same family can exist in different generations, emissions stages, injection systems and factory power ratings. The correct STEINBAUER part number depends on the exact application.

How much extra power is available on a FPT Cursor 9?

The increase depends on the exact application. STEINBAUER calibrations are developed for the individual engine, vehicle or machine and published performance data should always be checked on the exact application page.

Does STEINBAUER remap the original ECU?

No. The STEINBAUER module works alongside the factory engine management system without permanently rewriting the original ECU software.

Does STEINBAUER increase common-rail pressure?

No. STEINBAUER performance is achieved through application-specific injection-duration optimisation rather than increasing common-rail pressure.

Can the STEINBAUER module be removed?

Yes. The module is a removable hardware solution. Installation method varies by application, and registered customers and dealers can access available installation guides and videos.