Scania engine tuning
Scania DC13 tuning & performance modules.
Browse STEINBAUER applications for Scania DC13 engines. Find the correct application by machine or vehicle, engine specification, factory power output and STEINBAUER part number.
Engine family
One engine family. Many different applications.
Scania DC13 engines are used across a wide range of heavy-truck applications and factory power ratings. STEINBAUER therefore matches the module to the exact machine or vehicle and engine application rather than treating every engine in the family as identical.
Compatible applications
Find your Scania DC13 application.
Select the exact model and engine specification below. Each result links to its dedicated STEINBAUER application page with power, torque, part number and ordering details.
No matching published applications were found. Use the
full STEINBAUER Finder or contact STEINBAUER UK and we
will check the exact machine specification.
STEINBAUER technology
Additional usable power without permanently rewriting the ECU.
STEINBAUER works alongside the original engine management system. The module uses application-specific injection-duration optimisation while leaving the original ECU software in place.
- No permanent ECU remap
- No common-rail pressure increase
- No change to injection timing
- Factory ECU safety strategies remain active
- Removable hardware solution
- UK installation and technical support
Questions about Scania DC13 tuning
Frequently asked questions.
Can a Scania DC13 engine be tuned with STEINBAUER?
Yes, where a matching STEINBAUER application has been developed for the exact machine, engine management system and factory power level. Use the application list on this page to identify a compatible application.
Is every Scania DC13 engine the same?
No. Engines within the same family can exist in different generations, emissions stages, injection systems and factory power ratings. The correct STEINBAUER part number depends on the exact application.
How much extra power is available on a Scania DC13?
The increase depends on the exact application. STEINBAUER calibrations are developed for the individual engine, vehicle or machine and published performance data should always be checked on the exact application page.
Does STEINBAUER remap the original ECU?
No. The STEINBAUER module works alongside the factory engine management system without permanently rewriting the original ECU software.
Does STEINBAUER increase common-rail pressure?
No. STEINBAUER performance is achieved through application-specific injection-duration optimisation rather than increasing common-rail pressure.
Can the STEINBAUER module be removed?
Yes. The module is a removable hardware solution. Installation method varies by application, and registered customers and dealers can access available installation guides and videos.