Increased performance where applicable for stronger acceleration and improved working capability.
STEINBAUER application
Ford C-Max Power Module
1.0L EcoBoost EUR6 (Past-2017)
Increase from 123 BHP to 148 BHP and from 170 Nm to 204 Nm — without ECU remapping.
STEINBAUER performance module for the Ford C-Max 1.0L EcoBoost EUR6 (Past-2017), designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Up to +25% power and torque increase, depending on application.
- No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
- Application-specific engine management — developed for petrol passenger-car applications using vehicle-specific signal optimisation while retaining the factory ECU software.
- Removable solution that can be removed if required.
- Application-specific development for the individual engine and vehicle or machine application.
- Efficiency — More usable torque can help the vehicle pull strongly at lower engine speeds with less throttle demand, which may support improved fuel efficiency in suitable driving conditions.
Actual fuel consumption depends on vehicle load, operating conditions, terrain and driving or operating style.
Vehicle details
Not sure this is right for your
C-Max?
Ask STEINBAUER UK →
Learn more about car tuning →
- Manufacturer
- Ford
- Model
- C-Max
- Engine
- 1.0L EcoBoost EUR6 (Past-2017)
- Displacement
- 998 cc
STEINBAUER
Performance comparison
Power (BHP)
Illustrative car engine-speed curve
Move across the graph to explore RPM
Standard
123 BHP
STEINBAUER
148 BHP
+25 BHP
Torque (Nm)
Illustrative car engine-speed curve
Move across the graph to explore RPM
Standard
170 Nm
STEINBAUER
204 Nm
+34 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Road performance
More about STEINBAUER car tuning →
More usable performance for everyday driving
STEINBAUER car applications are developed to increase usable power and torque through the normal driving range while retaining progressive drivability.
Response
Stronger response and more usable performance through the normal driving range.
Overtaking
Additional torque can provide stronger acceleration when overtaking or joining faster traffic.
Lower-rev performance
More usable torque can help the vehicle pull more strongly without needing to rev the engine as hard.
Drivability
Progressive power delivery designed to remain smooth and easy to use in everyday driving.
Petrol performance technology
More than just peak horsepower
STEINBAUER petrol tuning focuses on sharper response, stronger usable torque and a more engaging drive through the engine's useful speed range.
- Application-specific performance control
- Sharper throttle response
- Stronger torque through the usable rev range
- Factory ECU and protection strategies retained
- Progressive performance rather than chasing peak BHP alone
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
Installation guides
Installation instructions for STEINBAUER part number 220698 .
Login required.
Installation guides are available to registered STEINBAUER customers,
dealers and administrators.
Ford C-Max tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Ford C-Max power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 123 BHP to 148 BHP, with torque increasing from 170 Nm to 204 Nm.
If you are searching for a Ford C-Max tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.