Increased performance where applicable for stronger acceleration and improved working capability.
STEINBAUER application
Tesla Model S P85 Power Module
85kWh
STEINBAUER performance module for the Tesla Model S P85 85kWh, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Application-specific EV performance — calibrated for the individual electric drivetrain and vehicle.
- Factory control systems retained — the STEINBAUER system works alongside the vehicle's original electronics.
- Improved response and acceleration where supported by the specific EV application.
- Enhanced recuperation available on compatible applications for increased regenerative braking effect.
- Removable plug-in solution designed to allow the vehicle to be returned to its original configuration.
Vehicle details
Not sure this is right for your
Model S P85?
Ask STEINBAUER UK →
Learn more about EV performance →
- Manufacturer
- Tesla
- Model
- Model S P85
- Engine
- 85kWh
- Displacement
- To be confirmed
STEINBAUER
Performance comparison
Power (BHP)
Illustrative electric-motor speed curve
Move across the graph to explore RPM
Standard
416 BHP
STEINBAUER
499 BHP
+83 BHP
Torque (Nm)
Illustrative electric-motor speed curve
Move across the graph to explore RPM
Standard
600 Nm
STEINBAUER
790 Nm
+190 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Electric performance
More about STEINBAUER EV technology →
Power and recuperation, application by application
Compatible EV applications are developed around the individual electric drivetrain and may offer increased output, enhanced recuperation or both.
Response
Sharper electric-motor response where supported by the application.
Power
Increased output on compatible EV performance applications.
Recuperation
Enhanced regenerative braking on supported vehicles.
Plug-in solution
Designed to work alongside the vehicle’s original electronics.
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
Tesla Model S P85 tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Tesla Model S P85 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 416 BHP to 499 BHP, with torque increasing from 600 Nm to 790 Nm.
If you are searching for a Tesla Model S P85 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.